Mining Anchor Cable Force Gauge
This tool is called the Mining Anchor Cable Force Gauge. It is a long-term monitoring tool. It is installed under the tray of a bolt or cable. It measures stress changes in the rock layer. If the pressure reading goes up, it means the rock is moving.
A Long-Term Monitoring Tool For Roof Stress
The roof may collapse. Then you must take action to remove the danger. This tester uses a pointer-type gauge. The reading is very clear at a glance. It is easy to use. The price is low. Many coal mine roof separation monitoring systems include this tester. We combine bolt and cable testers into one. You use the same gauge for both. The Mining Anchor Cable Force Gauge comes in three ranges. MCZ-200 handles 200 KN for regular bolts. MCZ-300 handles 300 KN for large bolts and small cables. MCZ-500 handles 500 KN for cables. Choose based on your support design. Our company started in 2007. We have our own R&D team. We have 19 patents.
Clear Reading and High Accuracy
The gauge has a large dial with clear numbers. The miner sees the pressure at a glance. No operation needed. The Mining Anchor Cable Force Gauge has a center hole of 26 mm. It fits bolts 16-24 mm and cables 15.24-28.6 mm. One model works for many sizes. Accuracy: MCZ-200/300 have class 2.5. MCZ-500 has class 0.5 (very high). For roof monitoring, this data is reliable. Our factory follows ISO9001. Every product is 100% inspected. The tester has a 12-month warranty. The table below gives the data.
|
Model |
MCZ-200 |
MCZ-300 |
MCZ-500 |
|
Capacity |
200 KN |
300 KN |
500 KN |
|
Center hole |
26 mm |
26 mm |
26 mm |
|
Suitable cable diameter |
15.24～21.8 mm |
15.24～21.8 mm |
15.24～28.6 mm |
|
Suitable bolt diameter |
16～24 mm |
16～24 mm |
16～24 mm |
|
Reading type |
Pointer |
Pointer |
Pointer |
|
Accuracy class |
2.5 |
2.5 |
2.5 |
|
Weight |
2.5 kg |
2.7 kg |
5.0 kg |
You Might Also Like
Send Inquiry