Mining Emulsion-Powered Cable Anchor Retractor
This tool is called the Mining Emulsion-Powered Cable Anchor Retractor. It is a special removal tool. It does not use air or an electric pump. It uses the emulsion already in the coal mine working face. Every longwall face has emulsion pipes.
Uses Existing Mine Resources
The pressure is usually 20 to 30 MPa. Our emulsion pump uses an emulsion motor. You connect it to the emulsion line. The motor drives the pump to pressurize hydraulic oil to 63 MPa. Then it drives the jack to remove the anchor. This unit has three parts. They are the retracting jack, the RYB-2.0/63 emulsion pump, and the high-pressure hose. You just plug the pump into the working face emulsion line. No need to run extra power lines or air pipes. Many coal mines already have emulsion lines at the working face. This unit is the most convenient. You do not add any equipment. Just plug it in and work. The Mining Emulsion-Powered Cable Anchor Retractor is perfect for removing corner anchors at the longwall face. Our company has worked with Hengli Hydraulic (stock code 601100) on this product. We have 20 patents.
Rare Technology in China
Using emulsion as a ultra-high pressure power source is technically hard. Few manufacturers in China can do it. We developed this emulsion pump with Hengli Hydraulic. The emulsion drives a motor. The motor then boosts the hydraulic oil to 63 MPa. The output flow reaches 2.0 L/min. This technology is also advanced internationally. Many mine technicians see this product and find it new and useful. This unit is built for the working face environment. The working face is wet. There is a lot of dust. Ordinary pumps fail quickly in this environment. Our emulsion pump is specially designed for these conditions. The internal parts are rust-proof. The seals are made to resist emulsion. The whole pump weighs 18 kg. It is easy to move. We have supplied this unit to several mines under China Coal Group. They said it had no major problems after two years of use. Our factory follows the ISO9001 quality system. We have our own R&D team. We cooperate with Chongqing University.
Fast and Efficient, Does Not Delay Production
Our RYB-2.0/63 emulsion pump has a rated flow of 2.0 L/min. This is much faster than a manual retractor. Removing a few anchors at the working face takes only a few minutes. This does not affect the normal progress of the shearer. For modern mines that want high output and high efficiency, this product is very valuable. The Mining Emulsion-Powered Cable Anchor Retractor comes with a 12-month warranty. We have a dedicated after-sales team. They work 24/7. We support third-party inspections. The MOQ is one set. Delivery for standard products takes 1-2 days. We accept EXW, FOB, and DDP. Payment can be in USD, EUR, or RMB. The table below shows all the data for this unit. Pick the right model for your cable.
|
Model |
Rated Retracting Force (KN) |
Cable Diameter (mm) |
Stroke (mm) |
Center Hole (mm) |
Jack Weight (kg) |
Inlet Pressure (MPa) |
Inlet Flow (L/min) |
Rated Oil Pressure (MPa) |
Rated Flow (L/min) |
Tank (L) |
Pump Weight (kg) |
|
TR15-300/63 |
300 |
15.24 |
100 |
18 |
18 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR18-400/63 |
400 |
17.8 |
100 |
20.5 |
20 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR19-500/63 |
500 |
18.9 |
70 |
21.5 |
24 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR22-600/63 |
600 |
21.8 |
70 |
24.5 |
26 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR29-700/63 |
700 |
28.6 |
70 |
32 |
29 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR32-700/63 |
700 |
32 |
70 |
35 |
29 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
|
TR35-700/63 |
700 |
35 |
70 |
38 |
29 |
10～32 |
8～16 |
63 |
2.0 |
4.0 |
18.0 |
Hot Tags: mining emulsion-powered cable anchor retractor, China mining emulsion-powered cable anchor retractor manufacturers, suppliers, factory, Mining Anchor Cable Retraction Jack, Mining Emulsion Powered Cable Anchor Retractor, Mining Manual Anchor Cable Retractor, Mining Pneumatic Anchor Cable Retractor, strand puller
You Might Also Like
Send Inquiry